Product center
Product center
LT cartridge type dust collector
The filter type dust collector is a new type of dust collector introduced and absorbed by our company, combined with the actual application situation in China, which has been continuously improved and perfected. It has the advantages of high purification efficiency, low pressure loss, simple operation, small size and large processing capacity
Horizontal series electrostatic precipitator
Electric dust collector is an efficient dust removal equipment to prevent the pollution of the atmosphere by the dust containing gas discharged from the industrial kiln. It has the characteristics of high purification efficiency, small resistance loss, high temperature resistance, large smoke volume treatment, reliable operation, simple maintenance, low operating cost and is widely used in metallurgy, electric power, building materials, chemical industry and so on.
WD series electrostatic precipitator
Compared with other dust collection equipment, WD horizontal electrostatic dust collector has the advantages of less investment, advanced technology, large smoke volume, high dust removal efficiency, low pressure loss, low operating costs, power consumption, simple maintenance, etc., and is widely used in metallurgy, building materials, electric power and other industries for material recovery and gas purification. Working principle
CLK diffused cyclone
The structure of the dispersive cyclone dust collector is characterized by the cone turning into an inverted cone and the reflection screen fixed by gas at the lower part, which can avoid the secondary dust collection caused by the enrolling and enrolling of the upswirl airflow returning from the upper part of the dust, so it can improve the dust removal efficiency. On the other hand, the cross section of the inverted cone is smaller and larger, so that the swirling velocity of the dusty gas in
XLP/A, XLP/B type cyclone:
The CLT/A cyclone has a downward spiral tangential inlet. In addition to being used as a single cylinder, it can also be used in combination with double, three, four and six cylinders. The combined type should mark the number and diameter of the cylinder. The four-barrel D55 is labeled CLT/ A-4X5.5. The combined structure and bracket are detailed in HVAC standard T505. Figure 4-13 shows the CLT/A type cyclone. Table 4-12 and Table 4-13 list the features and dimensions of the CLT/A cyclone
CLT/ Type A cyclone
The CLT/A cyclone has a downward spiral tangential inlet. In addition to being used as a single cylinder, it can also be used in combination with double, three, four and six cylinders. The combined type should mark the number and diameter of the cylinder. The four-barrel D55 is labeled CLT/ A-4X5.5. The combined structure and bracket are detailed in HVAC standard T505. Figure 4-13 shows the CLT/A type cyclone. Table 4-12 and Table 4-13 list the features and dimensions of the CLT/A cyclone.
Water film dust collector
First, water CLS type water film dust collector CLS type water film dust collector see the figure, its main performance and size are shown in the table. CLS type water film dust collector has XN, XS, YN, YS four kinds of combined, its identification method is the same as cyclone dust collector. CLS type water film dust collector has simple structure, less metal consumption and less water consumption. Its disadvantages are high height and difficult placement. The water supply pressure of the d
CDD.CDY.CDL series long bag low pressure pulse bag dust collector
In order to meet the needs of large air volume flue gas purification and specially developed large long bag low-pressure chamber pulse bag dust collector, in the spray technology, dust collector structure, microcomputer control and other aspects of innovation, with large air volume, small footprint, less steel consumption, relatively low equipment cost, energy saving and easy operation and maintenance, etc. The technical index of the dust collector has reached the level of similar foreign advanc
Article recommendation
Case presentation